If you’re looking for a solution for self-glowing bulbs and lights, a smart lighting control system is the way to go. It provides an aesthetic appeal to your house and makes your life easier. However, installing a smart lighting control system can be tricky.
This guide discusses step-by-step procedures that you can adopt to successfully install a smart lighting control system for your home.
How to Install Smart Lighting Control Systems?
Step 1 – Reduce the Risk of Operation
Before you start, it’s important to take safety precautions by lowering the voltage. From the 120V AC source, use a step-down generator to bring the voltage down to 12V DC.
Step 2 – Equipment Needed for Installation
You’d need low voltage lights and a cable made of copper or aluminum. They can be easily purchased from your local area or via Amazon.
Step 3 – Connect the Transformer to a GFCI Outlet
Before you start installing the lights, plug in the transformer to a GFCI outlet. Also, place your transformer near the smart light system.
Step 4 – Assembling the Lights
Follow the instructions on the manual provided with the light set to install the lights. Usually, the stakes are attached before attaching the lens and light bulb.
Step 5 – Place the Lights
At this point, you should lay out the lights at the right place so that everything is where you want it to be.
Step 6 – Placing the Transformer
Now it’s time to fix the transformer near the GFCI outlet above the ground. Make sure to fix the transformer using anchors made of plastics or lead.
Step 7 – Ensure Safety with a Small Trench
You wouldn’t want electric cables lying around as it’s dangerous for children and pets. Dig a small trench for laying the cable but don’t bury it as yet.
Step 8 – Attach the Cable
Now, tap the lights into the electrical lines by using clamps with metal teeth that can pierce through the cover of wire. Now, connect the output terminals of the transformer to stripped ends of the power cable.
Turn on the power to see if everything is working fine. The next day, bury the cables in the trench and apply a cover to protect the outlet.
Step 9 – Set the Programming to Your Needs
Now you can set the programming according to however long you want to keep the lightings on or off.
Step 10 – Your Smart Lighting Control System is Ready!
Now you can invite your family and friends to flaunt the beautiful lighting arrangement you have created with a smart lighting control system.
Looking for a licensed electrician in Philadelphia? At BG Electric Service LLC, we provide a wide range of electrical services like meter box replacement, generator installations, panel upgrades, and lighting installation in Philadelphia.
To avail our services, get in touch with us today for all your electrical solutions.