Installing a ceiling fan is a way to reduce energy bills without sacrificing comfort. Experts of ceiling fan installation in Philadelphia can easily set your fans, or you can do it yourself following some steps. The installation process requires only a few hours, and the payoff is great. You do not have to be a home improvement expert to install a ceiling fan.
Here is the complete guide telling you the right way of installing ceiling fans.
Ceiling Fan Installation Guide
1. Review the Safety Rules
The first step of installing a ceiling fan or any electrical equipment is to review safety rules. Reviewing safety rules is the best way to reduce the risks of injuries or property damage. Always shut off the power supply from the circuit breaker box before beginning. Verify that there are no obstructions present in the area or the installation site. Choose an outlet box that supports fan installation and verify that the connections comply with electrical codes. Read the manufacturer’s manual for more information on safety precautions and other rules.
2. Use Recommended Tools for Installation
Once you have purchased a fan of the right size and style, you look forward to basking in the cool breeze. As you prepare to install a new ceiling fan, you have to use proper tools that guarantee a safe project and timely finish. The tools include:
- Crescent Wrench: Crescent wrench, also called an adjustable wrench, is a tool with an adjustable screw to adjust the width of the jaws. Use the crescent wrench to tighten any bolts or support braces.
- Cordless Drill: You have to drill holes in several places for which you need a cordless drill.
- Voltage Tester: The tester consists of two leads that detect the presence of voltage in a fixture. Use a voltage tester while wiring a ceiling fan by placing one of the leads on the ground wire and the other on the hot wire. It ensures that there is no electricity running in the cables.
- Wire Cutters:Wire cutters indents and wedges a wire to cut them and strip the electrical insulation from them. Use this tool to install a ceiling fan by cutting and stripping the wires during the down rod assembly.
- Pliers and Screwdrivers:Use these tools to tighten the screws and pliers to lock nuts in the down rod assembly.
- Electric Tape:Electrical tape insulates and secures electrical wires. They are pressure sensitive and flexible to provide long-lasting insulation. Use plastic tape to insulate all cables.
- Ladder:You have to use a ladder to reach the ceiling area where you want to install the fan.
- Safety Gear: Wear safety goggles, gloves, and a dusk mask to prevent any shock accident or inhaling debris.
3. Determine Ceiling Fan Location
Choosing the location of installation is just as important as selecting a ceiling fan itself. The right place ensures your safety while reaping all the benefits of the fan with performance and efficiency. Experts of ceiling fan installation in Philadelphia show fans provide optimal airflow at least 8-9 feet above the floor. The fan blades must hang at least 7 feet above you and 8-10 inches below the ceiling. They have to be 18 inches away from doors, cabinets, and walls.
Lastly, confirm that the area surrounding the ceiling fan installation is not cracked or damaged.
4. Install Ceiling Fan with a Brace
Once you have selected the location and found the right tools, you have to replace the existing electrical box with a UL box labeled “Acceptable for Fan Support.” The outlet box supports almost 50 pounds, and if your fan is heavier, you need a heavy-duty brace to support its weight.
Remove the existing electrical box and pull it through the opening in the ceiling. Be careful not to crack or damage the area around the box. If the box does not move, place a piece of wood in the box and then tap it with a mallet to loosen. Remove any ceiling debris.
Insert the support brace in the open area and turn it until it locks into the joists. The teeth at the end will grip the joists and hold the mount in place. Use a wrench to secure the bolts and place a U-bolt on the safety brace. Fasten the brace using the screws provided.
5. Install Down Rod
Installation of a ceiling fan is not difficult, but it may take a few hours to complete based on your fan type and experience. If you prefer having a down rod fan, then you need to install it first. Secure the mounting bracket to the outlet box with the screws and washers provided. Run the wires through the opening provided in the bracket. Set the fan on the down rod and then connect the cables.
6. Wire the Fan Controls
Once you have everything set and ready, it is time to wire the fan controls. Connect the grounding wire from the ceiling, down rod, and the hanging bracket with a wire nut. Connect the white wire from the fan and receiver with a wire nut. Connect the black wire from the fan and receiver and finally join blue wire from fan and receiver.
If you want to connect the fan with the supply ad receiver, you have to connect the black wire from the ceiling and receiver marked “AC In.” Similarly, connect white wore from both and fasten them using electrical tape. Finally, follow the same steps to connect with wall control.
Enjoy Your New Fan
After following the steps provided by experts of ceiling fan installation in Philadelphia, you can finally enjoy the cool air of your fan.
Remember that a properly installed ceiling fan saves energy costs and reduces energy consumption. If you want to install a fan for yourself, follow all the steps to ensure the right usage.